Gate Repair in Burbank, CA
Gate repair in Burbank typically costs $180–$650 depending on the problem, and most calls are completed same-day when you call before noon. We’re Granite Gate Repair California, and we’ve been driving to Burbank since 2012 to fix gates that the San Fernando Valley’s punishing heat and Santa Ana winds have pushed past their limits. Call us at (888) 416-1369 for a free estimate.
Why Burbank Homes Are Different
Burbank’s housing stock of 1940s–1960s California ranch homes and post-war bungalows sits on lots with detached garages accessed by rear alleys. Those tubular steel and wrought iron side-yard gates are often 70 years old, with hinges corroded from decades of dry-heat cycling. The city’s position deep in the San Fernando Valley brings sustained summer temperatures above 100°F that expand metal frames until they bind, while autumn Santa Ana winds gusting 50–80 mph catch open automatic gates like sails. And Burbank’s independent municipal building department enforces its own UL 325 compliance inspections, separate from LA City or LA County rules, which catches out-of-area contractors who file the wrong paperwork.
Gate Repair in Burbank
We dispatch our Gate Repair crew to Burbank regularly. Louis Barrera and our team know the difference between a quick hinge fix on a Magnolia Park bungalow and a full frame rebuild on a hillside gate that’s been catching Santa Ana winds above Glenoaks Boulevard for twenty years. The original hardware on these properties was rarely galvanized to modern standards, and the combination of age plus Valley heat creates failures that look sudden but have been developing for decades.
Hinge Repair
The original hinges on Burbank’s 1940s–1960s ranch homes are often 50–70 years old, seized solid by decades of dry-heat cycling. We’ve replaced tubular steel hinges in the Rancho Adjacent area that had ground against the jamb until the pin fused to the barrel. Our hinge repair runs $180–$320 in Burbank, including hardware. When the barrel is cracked or the mounting plate has torn free, we weld a repair or install a heavy-duty replacement rated for the gate’s actual weight, not what was spec’d in 1958.
Post Repair
Burbank’s post-and-gate setups take abuse from two directions: expanding metal frames in 100°F+ summer heat, and Santa Ana wind events that load gates like sails. A leaning post in the Burbank Hills or Magnolia Park throws off the entire geometry and strains the operator. Post repair in Burbank ranges from $280–$550 depending on whether we’re resetting an existing post in concrete or replacing a rotted wooden post with pressure-treated or steel. We check footing depth against local sandy, fast-draining soil conditions.
How much does emergency gate repair cost in Burbank after wind damage?
Most wind-damage repairs run $220–$480 for structural fixes, or $800–$2,400 if the operator gears stripped too. Santa Ana winds catch open gates like sails, bending frames and stripping gears. We carry replacement components and weld on-site to get you back in motion fast. Call (888) 416-1369 for an exact quote — estimates are free.
Gate Installation in Burbank
Gate installation in Burbank typically runs $2,800–$8,500 depending on gate type, automation, and site conditions, with most residential driveway projects completed in 2–4 days. We’re familiar with the demands of Burbank properties, from ranch homes near the studios to hillside places off Glenoaks, and we stock heavy-duty hardware that handles Santa Ana winds without callbacks. Gate Installation is measured, ordered, and scheduled — we promise a free measure and a written price, not same-day dispatch.
Sliding Gate Installation
Sliding gates dominate Burbank’s tighter lots, especially post-war bungalows along streets like N Kenwood and alleys behind Alameda Ave. A sliding gate doesn’t need swing clearance, which matters when your driveway ends at a garage. We install cantilever and track-mounted systems, and we spec operators with enough torque to handle wind load. Standard openers rated for 15 mph sustained wind fail here within a season.
Security Gate Installation
Burbank’s entertainment-industry residents need motorized privacy gates that actually secure the property. We install steel-framed security gates with integrated access control, and every automatic security gate we install in Burbank is engineered to pass the city’s UL 325 compliance inspection. We’ve seen failed inspections cost homeowners an extra $1,200 in rework from contractors who assumed LA County rules applied. We don’t let that happen. Security gate installation with intercom or phone entry runs $7,500–$12,000.
Do I need a Burbank permit for automatic gate installation?
Yes. Burbank’s municipal building department requires permits for all automatic gate operators and enforces UL 325 compliance inspections stricter than LA County’s. We handle plan check and permit submission as part of installation, spec’ing every system to pass the first time. Call (888) 416-1369 for a free estimate — we’ll walk you through the permit timeline.
Gate Motor & Opener in Burbank
Gate motor repair in Burbank typically costs $280–$650 depending on operator type, and most service calls are completed same-day when you call before noon. The San Fernando Valley’s sustained heat expands metal gate frames against posts, binding motors and throwing limit-switch calibration out — we’ve replaced more seized FAAC and Linear limit-switch assemblies in Burbank than anywhere else we serve. Our Gate Motor & Opener team carries in-house parts and welding capability so we’re not waiting on distributors.
Motor Installation
New gate motor installation in Burbank runs $850–$2,400 depending on gate weight, cycle frequency, and whether the property needs electrical run to the operator location. We see a lot of first-time automation on tubular steel or wrought iron side-yard gates common in Magnolia Park and the Media District, where detached garages create rear access points homeowners want to secure. Every Burbank install includes UL 325 compliance documentation formatted specifically for the city’s building department, not a generic LA County packet.
Linear Motor Service
Linear motors are popular on Burbank’s swing gates, especially hillside properties in Verdugo Woodlands where space constraints rule out slide operators. A typical Linear motor repair or replacement costs $320–$680. We replaced a corroded FAAC linear motor on a wrought iron alley gate behind a 1950s ranch home near Warner Bros., where decades of dry-heat cycling had seized the limit-switch assembly and Santa Ana winds stripped the gear teeth. We installed a galvanized-rail Linear motor with stainless steel drive arm rated for the conditions.
Why does my gate motor stop working after Santa Ana winds?
The wind catches your gate open and forces the motor to fight against it, physically shifting the limit-switch cam or scrambling position memory on board-controlled units. In Burbank, where gusts routinely hit 50–80 mph, this is a weekly pattern during wind season. The fix isn’t just recalibrating — it’s adding wind-resistant guide hardware and checking whether your operator is undersized for the load. Call (888) 416-1369.
Gate Access Control in Burbank
Gate access control installation and repair in Burbank typically runs $1,200–$3,800 for most residential properties. We know Burbank’s gates inside and out, from wrought iron alley gates behind California ranch homes near Victory Boulevard to heavy-duty motorized privacy gates along the Rancho Equestrian District’s horse trails. Gate Access Control systems are measured, specified, and scheduled — we start with a free on-site evaluation to determine wiring paths and equipment ratings.
Keypad Entry Systems
Keypad entry installation in Burbank typically costs $380–$720, with repairs running $150–$340. Standard residential units often fail after two or three Burbank summers because their membrane switches weren’t designed for sustained 100°F+ exposure. For properties with detached workshops and heavy-duty operators, we spec commercial-grade keypads with metal housings and sealed contacts. We recently serviced a heavy-duty sliding gate on a Rancho Equestrian District property where the original keypad had melted internally.
Phone Entry Systems
Phone entry system installation ranges from $890–$1,800 for cellular-based units, $1,400–$2,600 for hardwired systems with video capability. These are popular with multi-unit properties near the studio district, where landlords manage visitor access remotely. Burbank’s older telephone infrastructure in some 1940s–1960s neighborhoods can complicate hardwired installs; we assess whether existing copper lines support the system or whether a cellular bridge makes more sense. We handle programming so your phone entry integrates cleanly with your operator, whether it’s a Viking slide motor or a Ghost Controls swing arm.
Are video intercoms compatible with older Burbank bungalows with alley access?
Yes, though installation requires routing cable from alley gate to house, which can mean trenching or using existing conduit in older neighborhoods. For bungalows with detached garages accessed by rear alleys, we often mount the intercom call station on the alley gate post and run low-voltage cable underground, or use a wireless bridge where trenching isn’t practical. Call (888) 416-1369 and we’ll survey your specific route.
Gate Parts & Welding in Burbank
Gate parts and welding repair in Burbank typically runs $180–$650 depending on whether you’re dealing with corroded hinges on a 1950s alley gate or structural frame welding after a Santa Ana wind event. Most calls in the 91521, 91522, 91523, and 91526 ZIP codes get same-day or next-day response. Our Gate Parts & Welding capability means we don’t outsource — we fabricate, weld, and source parts on-site.
Hinge Replacement
Original hinges on Burbank’s 1940s–1960s ranch homes are often 50–70 years old, seized solid by decades of dry-heat cycling. We’ve drilled out snapped bolts on Magnolia Park alley gates and replaced them with heavy-duty ball-bearing hinges rated for Valley temperature swings. A typical hinge replacement runs $180–$320 for standard residential gates, $380–$550 for heavier wrought iron or custom-fabricated setups where we match existing hole patterns.
Rail Repair
Bent top rails and broken bottom rails are common after Santa Ana wind events catch open gates near the Rancho Equestrian District. Our mobile welding rig lets us splice box tube or angle iron on-site, grind flush, and prime same-day. Rail repair with welding generally runs $280–$480 for a single rail, $520–$780 for multiple bends or a full frame pull. We match existing welds and finish to blend with weathered steel.
Can you get replacement hinges for a 1950s tubular steel alley gate?
Sometimes, but rarely in the original configuration. We machine adapter plates or weld custom hinge brackets to match existing hole patterns when off-the-shelf replacements don’t exist. Expect $280–$450 if we can adapt standard hardware, or $480–$650 for full custom fabrication. We evaluate frame condition first — welding new hinges to corroded box tube wastes your money. Call (888) 416-1369 for a free evaluation.
Brands We Service in Burbank
We service nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Viking, Ghost Controls, and DoorKing locally, which means most Burbank repairs don’t wait on shipping. Our brands — your system, our specialty.
Pricing for Gate Repair in Burbank, CA
| Service | Typical Range in Burbank |
|---|---|
| Hinge repair or replacement | $180 – $320 |
| Post repair or reset | $280 – $550 |
| Weld repair (structural) | $220 – $480 |
| Gate realignment | $200 – $380 |
| Lock repair or replacement | $150 – $280 |
| Rust treatment and coating | $180 – $350 |
| Operator diagnostic + repair | $200 – $450 |
| New motor installation (single swing) | $850 – $1,400 |
| New motor installation (dual swing or slide) | $1,200 – $2,400 |
| Keypad entry installation | $380 – $720 |
| Phone entry system installation | $890 – $1,800 |
| Security gate with intercom/phone entry | $7,500 – $12,000 |
Factors that push costs higher in Burbank: heavy or oversized gates requiring two technicians, custom fabrication when no replacement part exists, operator replacement versus repair, and Burbank permit filing for new automatic gate installations. We quote every price upfront before any work begins, and we don’t markup parts.
Neighborhoods We Serve in Burbank
We regularly repair and install gates across Burbank’s distinct neighborhoods, each with its own gate types and conditions:
- Magnolia Park
- Rancho Adjacent
- Media District
- Rancho Equestrian District
- Verdugo Woodlands
Most Burbank calls receive same-day or next-day response depending on when you call and parts needed.
Service Area — Cities Near Burbank
Granite Gate Repair California serves Burbank, CA and surrounding communities including Universal City, CA, North Hollywood, CA, Glendale, CA, Studio City, CA, and La Crescenta-Montrose, CA. Louis and the Granite Gate team have been driving these routes since 2012, and we know the local building departments, soil conditions, and wind exposure patterns that determine whether your gate repair lasts.
Serving Burbank, CA — Our Local Coverage Area
We’re based nearby and serve all of Burbank, CA. The map shows the Burbank coverage area; if your address is on it, we can help.
Also serving nearby: Burbank, CA, Universal City, CA, North Hollywood, CA, Glendale, CA, Studio City, CA, La Crescenta-Montrose, CA.
FAQs About Gate Repair in Burbank
Most repair calls in Burbank receive same-day service when you call before noon, and we carry parts for nine major brands to avoid delays. Santa Ana wind damage and heat-related failures are our most frequent emergency calls here, and our crew knows the difference between a quick calibration fix and a full frame rebuild. Call (888) 416-1369 — we’ll give you an honest timeline.
Yes. Burbank’s independent municipal building department enforces its own UL 325 compliance inspections, separate from LA City or LA County rules. Out-of-area contractors routinely fail inspection because they file standard county paperwork. We prepare Burbank-specific documentation and coordinate plan check as part of our scope, so your install passes the first time. Call (888) 416-1369 to confirm what’s needed for your project.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Nathan Bennett"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— David Nguyen"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Nabil Najjar