Fast, Reliable Gate Installation Across North Hollywood
Gate installation in North Hollywood runs $2,800–$6,500 for most residential and multifamily jobs, with same-week scheduling available throughout the 91601, 91605, 91606, and 91615 zip codes. We’re familiar with the Valley heat, the aging apartment stock, and the LADBS permitting that every major job here requires. Call (888) 416-1369 for a free estimate.
Louis and the Granite Gate team have been installing and replacing gates across the San Fernando Valley for 14 years. We know North Hollywood isn’t like the Westside or even neighboring Burbank. The 1960s–1970s dingbat complexes along Magnolia Boulevard and Lankershim Boulevard, the single-family ranches tucked behind them, and the long driveway approaches off Tujunga Avenue all present different challenges. We’ve replaced operators that were installed when these buildings were new. We understand what fails here and why.
Why Granite Gate Repair California Is North Hollywood’s Preferred Gate Installation Company
Our 197 verified reviews averaging 4.7 stars include steady work from North Hollywood property managers and homeowners who found us after out-of-area contractors underestimated the job. We’re not guessing at Valley conditions. We know that a gate motor rated for moderate climates will burn out in a North Hollywood summer. We price the electrical sub from the start because we’ve pulled too many old Linear operators wired into shared panels with no junction box.
Response time to North Hollywood is typically same-day or next-day. We’re not crossing the hill from the Westside or driving down from Santa Clarita. Our dispatch understands the difference between a quick operator swap on a single-family ranch near Valley Glen and a full LADBS-compliant replacement on a 40-unit complex off Vineland Avenue. That local knowledge saves days on every permitted job.
Louis Barrera, our Founder and Master Technician, still works in the field. He’s the one who flagged the pattern of Santa Ana wind damage on NoHo slide gates, and he’s the one who specified reinforced tracks for a complex near Coldwater Canyon Avenue after the third callback from the original installer. When you call us, you’re talking to someone who has physically worked on gates in your neighborhood, not a call center routing to the nearest available truck.
Our Gate Installation Services in North Hollywood
Sliding Gate Installation
Sliding gates dominate North Hollywood’s multifamily market for good reason. The narrow lots and long driveway approaches off major corridors like Lankershim and Magnolia don’t leave swing clearance. We install new sliding gates on reinforced track systems built for the Valley’s heat and wind loads. Our field vignette: On a 1970s dingbat complex near Magnolia Boulevard and Lankershim Boulevard, we replaced a failing Linear operator that was still wired into the building’s shared electrical panel with no junction box. We subbed in an electrician to bring the circuit up to LADBS code, then installed a new LiftMaster sliding gate opener with a dedicated circuit, preventing the common motor burnout caused by the Valley’s 100°F summers.
For properties with longer service drives, we spec heavier-duty operators than the original build. A 1/2 HP unit might have handled a 15-foot gate in 1975. Today, with aluminum frame warping from decades of heat cycling and Santa Ana lateral loads, we typically install 3/4 HP or 1 HP units with upgraded wheel guides and track bracing.
Swing Gate Installation
Single-family homes in North Hollywood, particularly the ranch-style properties near the border with Valley Glen and the hillside pockets off Tujunga Avenue, often suit swing gates better than sliding systems. We install both single and double swing configurations with proper post footings rated for the gate weight and wind exposure. The key detail in NoHo is hinge specification. Original 1960s gates often ran on undersized hinges that sag within a few years under Valley heat and dust. We upgrade to heavy-duty ball-bearing hinges and reinforced posts as standard.
Security Gate Installation
Security gates in North Hollywood serve a dual role: access control for multifamily buildings and perimeter security for commercial properties along the major boulevards. We install wrought iron, aluminum, and steel security gates with integrated access control, intercoms, and keypad or fob entry systems. Every security gate we install in North Hollywood is spec’d with the understanding that LADBS will inspect it if it’s part of a permitted operator replacement or new construction. We build code compliance into the design from the first measurement.
Pedestrian Gate Installation
Pedestrian gates are increasingly requested alongside driveway gates on North Hollywood properties, particularly on corner lots and multifamily buildings where foot traffic enters separately from vehicle access. We match pedestrian gate materials and style to the main gate, with compatible latch hardware and optional keypad or fob integration. For apartment complexes, we often install pedestrian gates with panic hardware and ADA-compliant clear widths, coordinated with the main vehicle gate’s access control system.
Driveway Gate Installation
Our Gate Installation team handles full driveway gate replacements and new installations across North Hollywood’s varied property types. From the long approaches off Lankershim Boulevard to compact driveways near the NoHo Arts District, we measure, fabricate, and install gates built for the actual site conditions. We don’t pull a standard size from a catalog and make it fit.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Hollywood
We work across nine major gate automation brands, and we keep local parts inventory for the ones we see most in North Hollywood. Linear operators show up constantly on older apartment complexes, Viking and FAAC on mid-range multifamily retrofits, and LiftMaster on newer installations and our own replacement jobs. Because we source parts in-house and weld structural components on-site, we don’t wait for a third-party fabricator or parts warehouse to ship from out of state. That matters when a property manager on Vineland Avenue needs a gate back in motion before the weekend.
Common Gate Installation Problems We See in North Hollywood Homes
- Original 1970s slide gate operators with no dedicated circuit cause electrical overload and motor burnout when summer temps hit 100–110°F. Replacement requires an electrician sub for LADBS compliance, a delay out-of-area contractors miss.
- Santa Ana winds in fall and winter warp aluminum gate frames and crack rubber wheel guides on aging slide gates, making installation of heavier-duty gates with reinforced tracks essential for longevity.
- Many apartment gates have undersized springs and hinges from the original build, leading to sagging and misalignment. We install oversized heavy-duty hardware to handle the actual load, not the theoretical load from a 1968 blueprint.
- Long driveway approaches off Lankershim and Tujunga require operators with sufficient power and proper limit switch calibration. An undersized unit will strain on every cycle and fail prematurely.
Pricing for Gate Installation in North Hollywood, CA
A typical pedestrian gate installation in North Hollywood runs $2,800–$4,200. Single swing driveway gates range $3,500–$5,500. Sliding gates, which require track, rollers, and typically heavier operators, run $4,500–$6,500. Double swing configurations and security gates with integrated access control start around $5,000 and scale with materials and electronics.
What moves the number: gate material (steel versus aluminum versus wrought iron), operator horsepower and brand, whether LADBS permitting and electrical upgrades are required, and site conditions like slope or existing post condition. The electrical sub for code compliance on older apartment buildings typically adds $800–$1,500 to the project. We include that in our quote from the start, not as a surprise change order.
Every estimate is free and itemized. Call (888) 416-1369 to schedule.
We Also Serve Cities Near North Hollywood
We install gates throughout the Valley corridor, including Studio City to the south, Universal City and Burbank to the east, and Valley Glen to the north. The same LADBS code compliance, heat-resistant operator specification, and reinforced track installation we bring to North Hollywood applies across these neighboring markets.
Serving North Hollywood, CA — Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Installation in North Hollywood
Yes, if the replacement involves electrical work or a new operator installation, LADBS requires a permit. North Hollywood falls under City of Los Angeles jurisdiction, not an independent city like Burbank, so every permitted operator replacement must clear LADBS inspection, including verification of dedicated circuits and proper junction boxes. We handle the permit application and scheduling as part of our project management. Call (888) 416-1369 and we’ll walk through what’s required for your specific property.
North Hollywood’s summer temperatures routinely reach 100–110°F, 15 to 20 degrees hotter than coastal LA, which accelerates motor burnout on operators not rated for sustained heat exposure. Many older properties also have motors wired into shared electrical panels without dedicated circuits, causing voltage fluctuation and overheating. We install heat-rated operators with proper electrical infrastructure to solve both problems. Call (888) 416-1369 for a free assessment of your current setup.
Long driveway approaches require higher-horsepower operators with proper limit switch calibration, typically 3/4 HP or 1 HP for gates over 16 feet or with significant slope. An undersized unit strains on every open/close cycle and will fail within 18–24 months in North Hollywood’s heat and wind conditions. We measure your gate weight, track length, and cycle frequency to spec the right unit. Call (888) 416-1369 for an exact sizing.
The most common issue is an original operator wired into the building’s shared electrical panel with no dedicated circuit and no junction box, which violates current LADBS code. This surfaces the moment the old operator is disconnected, forcing an electrical subcontractor before the gate work can proceed. Local techs price this into the quote from the start; out-of-area contractors often miss it and hit you with a change order. We identify this during our initial site visit. Call (888) 416-1369 to schedule.
Yes, we regularly install matching pedestrian gates alongside driveway gates on North Hollywood properties, particularly corner lots and multifamily buildings with separate foot traffic patterns. We coordinate materials, hardware finish, and access control integration so both gates function as a unified system. Pedestrian gate installations in North Hollywood typically run $2,800–$4,200 depending on width, material, and electronics. Call (888) 416-1369 for a free estimate on your specific layout.
Written by Louis Barrera, Owner at Granite Gate Repair California, serving North Hollywood and the San Fernando Valley since 2010.